| Grandstream ATA adaptor setup with Tpad |
| |
 |
| |
| Step 1 |
|
Connect an Ethernet cable from your PC to the Grand stream ATA LAN port. Make sure that your PC Ethernet Internet Protocol (TCP/IP) is set to “Obtain an IP address automatically”. |
| |
| Step 2 |
Go to any browser equipped computer on your network and enter the address: http://192.168.2.1 |
| |
| Step 3 |
You will be prompted to enter a password, the default is "admin", then click the "Login" button. |
|
| |
| Step 4 |
Plug in an Ethernet cable from your Cable or DSL modem into the WAN port of the ATA Adaptor.
Ensure that dynamically assigned by DHCP is selected.
If your ISP assigns you IP number by PPPOE, enter the information assigned by your ISP into the circled areas.
|
| |
|
| |
| Step 5 |
You need to modify only a few parameters under the FXS Port tab. They are listed here:
|
| SIP Server |
Enter sip.tpad.com |
| SIP User ID |
Enter your Tpad Phone Number e.g. 1199977 |
| Authenticate ID |
Enter your Tpad Phone Number e.g. 1199977 |
|
| |
| Authenticate Password: |
Enter your Tpad Account Password. |
| Name |
Enter your full name. This will show up as part of your callerid. |
| Send DTMF |
Ensure this is set to via RTP |
| SIP Registration |
Ensure this is set to Yes |
|
| |
|
| |
| Step 6 |
| |
Click on the "Update" button at the bottom of the form.
 |
| |
| Step 7 |
| |
| You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes". |
| |
| Step 8 |
| |
Click on the "Reboot" button at the bottom of the form.
|
| Step 9 |
| |
| Make Tpad calls! |
