| Linksys VoIP Adaptor Setup with Tpad |
| |
 |
| 1. Connect network cable, power supply and analogue handset. |
| |
| 2. After the unit has finished powering up, pick up the handset and dial **** to access the Linksys voice menu. At the voice prompt, dial 110# and you should hear the IP Address of the unit. Go to a web browser and type in the IP Address like so: |
|
http://IP_ADDRESS/admin/advanced or
use the default local IP address http://192.168.0.1/admin/advanced|
The administration screen of the Linksys should be displayed. |
| |
|
| |
3. Click on Voice and then Line 1 tab and configure your Tpad account details as follows:
Set Proxy to: sip.tpad.com
Set Outbound Proxy to: sip.tpad.com
Set Use Outbound Proxy to yes
Set Register to yes
On the same page, set up your Subscriber Information as displayed in the example below. |
| |
Set Display Name to your Tpad Phone Number e.g.1199977
Set User ID to your Tpad Phone Number e.g.1199977
Set Auth ID to your Tpad Phone Number
Set Password to your Tpad Account Password
Set Use Auth ID to yes |
| |
|
| |
Leave all other settings as Default.
Click SUBMIT ALL CHANGES at the bottom of the page to save the settings and reboot the Linksys ATA. |
