| Polycom Soundstation IP Phone Setup with Tpad |
 |
| |
Plug the network cable from Internet connection and plug it into the Polycom LAN port and turn it on.
To locate the Polycom’s IP Address, press MENU > STATUS > NETWORK > TCP/IP PARAMETERS.
2. Open a web browser on your PC and type the Polycoms IP address in the address field: |
e.g. http://192.168.2.2 |
| |
| 3. This will present you with the configuration web page for the phone |
|
| 4. Click on SIP. |
This will ask for your username and password: The default admin username is Polycom and the default admin password is 456 |
| |
| 5. Enter the Outbound proxy and Server 1 values as follows: |
|
Press the "Submit" button and it will save the settings and reboot the phone.
When the phone has rebooted, click on Lines. |
| |
|
| Enter the following values in the Identification section: |
| |
| Display Name |
Your Tpad Number e.g. 1123444 |
| Address |
Your Tpad Number@sip.tpad.com
e.g. 1123444@sip.tpad.com |
| Auth User ID |
Your Tpad Number e.g. 1123444 |
| Auth Password |
Your Tpad account Password |
| Label |
Your Tpad Number e.g.1123444 |
|
| |
|
|
Press the "Submit" button and it will save the settings and reboot the unit.
Your phone will now register your Tpad account and is ready to use.
|
